Stage props the production process, to shape and color of the most important, because both constitute the most important in performing visual experience, especially the Plaza show, without the aid of lighting, props have to completely square performances of the its own color to impress the audience. The following summarize some of the paint spraying process, of course, if coverage is not the props, we usually use acrylic paint to spray, but on the whole process, the paint and the paint still has a lot of similarities.
Major construction technology
(1) varnish construction process:
Clean the surface of wood props → Run on matte paper, lighting → → Park powder grinding sandpaper scraping → full pass putty, sanded → full second time scraping putty, fine sanded → brushing → brush color pass oil varnish → fight to find color, re-fill putty, fine sanded → second time varnish brush, fine sandpaper polished → varnish brush the third time, the water → polished back light sanding, waxing, polishing.
(2) Construction of the paint mixing process:
First clean the surface of the dust props to repair the grass-roots → → with sanding paper tie knots at the paint chip to play backing putty → → → First fill the putty dry oil coated polished → → → brushing primer primer dry brushing the surface layer of the hard → → → re-fill putty to repair finish brushing polishing wipe the third time the second time coating polished → → → finish the third time polishing and waxing.
2. Construction points
Edible vegetable oil brushing the construction specifications
Props polished surface is an important process brushing varnish, the surface should first be props dust, oil and other impurities removed. Run on the brushing varnish oil powder is an important process, the construction of silk with cotton dipped in oil powder coated on the surface of the props, rub back and forth by hand, rub the oil into powder props police eye. Edible vegetable oil when brushing, brush oil to natural and relaxed hand, fingers gently forced to move is not loose, can not afford to brush prevail. Brushing more than minor in accordance with dip, dip each little oil, ground operations, along brush requirements, according to the first following, before tackling the difficult, first left and right, the first in the sequence and the outer horizontal brush method of operation along the vertical construction.
Contaminated surface props construction
Primary treatment, in addition to cleaning up the debris outside the grass-roots, but also for local putty embedded complement, playing down the sandpaper when sanding wood props. Brushing the surface layer before the application of paint film (shellac varnish) to have greater fat color and wood knots at the back cover. At the grassroots level should be clear coated with dry oil or park, brushing dry oil layer over to all parts of the uniform brush, the brush can not be missed. Base oil is dry, full pass putty scraping, dry sanding by hand, then make high-strength putty, putty in order to pick the wire does not fall subject. Brushing the surface layer of paint should be polished with fine sandpaper.
3. Need to pay attention
(1) primary processing steps according to the construction, to ensure that the surface of the paint brush will not fail.
(2) clean up the environment, to prevent the dust fly props.
(3) because the paint has some toxicity, irritation of the respiratory tract have a stronger effect, we must pay attention to good construction through f
Surface preparation before painting is a series of substrate processing to meet the paint standard. Proper surface preparation, can enhance the adhesion, the ability to improve the protection of the entire system to extend its useful life and so on. Varnish is dry transparent film substrate itself can see the color and texture of a class of coatings collectively. After the paint is dry will base itself in the color and texture covers, and the process needed to give the show props color. General construction of hard dry in the paint will take some time to completely dry, this process usually takes seven days. During this time, the film will be fully cured, the best performance. During this time should be taken to avoid water spray or dust floats props such as the body, to avoid excessive rubbing or scrubbing, avoid contact with solvents or other chemicals, avoid exposure to excessive moisture, otherwise it will affect the protective properties of paint分享到...
